Jie Tai Oldham coupling homegrown, are the two halves of the coupling surface is formed with a radial slot, made symmetrical on both sides of the middle slider projections, set in a radial groove couplings, coupling so has the role of transmitting torque, SL slider couplings used in motors commonly used in the course to correct the relative displacement by sliding the slider. SLSL Cross Oldham coupling 45 steel parts of the material available, require lower Q275 steel can also be used, in order to reduce friction and wear, when to use grease from the hole in the middle of the disk for lubrication, or in the contact area with the slider The line quenching treatment, SL Oldham coupling is generally used for <250r / min, the stiffness of the shaft is large, and there is no severe impact at a good clean Thai Oldham coupling operating performance, greater torque, You can compensate for a certain deviation between the two axes, are widely used in mining, metallurgy, transportation equipment, favored by customers. Just pay attention to the equipment used does not exceed the speed of 250 rpm, the intermediate plate and coupling half lubrication will extend the life of the cross coupling during operation. Botou Jie Tai Machinery Factory is a professional manufacturer producing Oldham coupling, using qualified materials, the use of advanced equipment manufacturing, warehousing blanks to put into production, by means of self and mutual inspection and after-sales service each session to help customers improve efficiency and reduce costs.